UAE
Lightweight cement-fibre wall panel

APEX Speed Wall™

One factory-made panel that does the job of an entire wall build-up. High-density cement-fibre faces, a lightweight high-specification core, and a tongue-and-groove edge. 75, 100 and 150 mm.

Panel range

Choose by application

ThicknessTypical useServices
75 mmInternal partitions, room dividers, cupboard and riser enclosuresSurface-mounted and shallow-chased conduits
100 mmApartment separating and corridor walls, fire-rated partitions, shaft and stair enclosuresEmbedded conduits, back boxes, standard runs
150 mmExternal walls, party walls, load-bearing configurations, high fire and acoustic assembliesFull integration incl. larger conduits

Standard heights with cut-to-height options. Widths, weights and certified performance by thickness are set out in the APEX Technical Submission.

Construction

What is inside the panel

High-density cement-fibre facings bonded to a proprietary lightweight core in a controlled factory environment. Strong, dimensionally accurate, and the same every time.

Speed Wall panels stacked in the factory, showing the core and edge profile
Faces

Cement-fibre board

Durable, water-resistant and paint-ready. A direct tiling substrate in wet areas.

Core

Lightweight high-spec core

Fire, acoustic and thermal performance, with U-values from 0.16 W/m²K.

Joints

Tongue and groove

Panels lock together for a straight, flush wall with minimal jointing.

Services

Fix anywhere

1,800–2,000 N pull-out. Kitchens, sanitaryware and TVs fix direct, no pattressing.

Installation sequence

A dry install by a small gang with hand tools

Set out and prepare

Mark wall lines, set base and head restraint to line and level.

Set and joint

Plumb the starter panel, then slide each panel home on jointing adhesive.

Openings and fixing

Form openings in the run, no lintels. Restrain to soffit and returns.

Services

Chase conduits and back boxes into the panel and make good.

Finish and hand over

Fill and tape joints only, inspect, and hand over paint-ready.

Technical data

Performance specification

Request the technical submission
CharacteristicSpeed Wall™Notes
Fire resistanceUp to 4 hours +Subject to system configuration and certification
Acoustic performance43–65 dBVaries by panel thickness and assembly detail
Thermal U-value0.16–0.36 W/m²KFactory-insulated, no site-applied insulation layer
Direct pull-out strength1,800–2,000 NNo pattressing typically required
Compressive strength5.5 N/mm²Supports load-bearing configurations where engineered
Wet area suitabilityAcceptableWater-resistant, no substrate treatment required
Plaster, wet trades, lintelsNot requiredPaint-ready from jointing
Site wastageApprox. 3%Against 20–25% for traditional systems
Installation labourUp to 50% lessCompared with conventional partitions
Panel thicknesses75 / 100 / 150 mmStandard heights with cut-to-height options
Quality managementISO 9001Independent British Standards certification

Indicative planning values from tested system configurations. Certified performance is assembly-specific and set out in the APEX Technical Submission.

Applications

Where it goes

Residential and high-rise

Separating and corridor walls, risers, bathrooms and external walls.

Hospitality

Guest room separating walls with high acoustic demand, escape routes.

Commercial and office

Core walls, fit-out partitions, fire compartmentation, demise walls.

Healthcare and education

Ward and classroom partitions, wash-down areas, rated corridors.

Industrial and logistics

Office pods in warehouses, fire walls, external ancillary walling.

Modular and precast

Installed in the factory into volumetric modules and precast frames.

Questions

Speed Wall FAQs

What is APEX Speed Wall?

Speed Wall is a factory-made lightweight wall panel from APEX. Each panel has cement-fibre faces bonded to a lightweight core, with tongue-and-groove edges. It replaces blockwork and drylining for internal partitions, separating walls, shaft and riser enclosures and other walls, and is supplied in 75, 100 and 150 mm thicknesses.

Which thickness should I use?

Use 75 mm for internal partitions, room dividers and enclosures. Use 100 mm for apartment separating walls, corridor walls, fire-rated partitions and shaft or stair enclosures. Use 150 mm for party walls, external walls and the highest fire and acoustic assemblies. APEX confirms the right panel for each wall type in the project technical submission.

How is Speed Wall installed?

It is a dry installation by a small team with hand tools. The team sets out base and head restraints, slides each panel into place on jointing adhesive, forms openings without lintels, chases in services, then tapes and fills the joints. The wall is paint-ready with no plaster or wet trades.

What fire and acoustic performance does Speed Wall achieve?

Performance depends on panel thickness and the full wall assembly. The certified fire and acoustic values for each wall type are set out in the APEX technical submission with the supporting test reports. Ask APEX for the submission before specifying.

Can heavy items be fixed directly to the panels?

Yes. Indicative direct pull-out strength is 1,800 to 2,000 N, so kitchen units, sanitaryware and TVs can usually be fixed without pattressing. Confirm fixings for heavy or safety-critical items with APEX.

How does Speed Wall compare with blockwork?

Speed Wall is installed dry, needs no plaster, lintels or wet trades, and arrives cut to height, so site waste is low (about 3% indicative, against 20 to 25% typical for traditional walls). Programme and labour savings depend on the project; APEX can price a wall schedule to compare.

Does APEX supply in Dubai and the rest of the UAE?

Yes. APEX supplies and installs Speed Wall across the UAE and works with consultants and contractors on the approvals each project needs, including Dubai Civil Defence for fire-rated walls.

How do I get a quote?

Send your wall schedule or drawings through the quote form at apex-mmc.com/contact.html, email info@apex-mmc.com or message +971 58 607 1084 on WhatsApp. APEX replies within one working day.

Have a wall schedule? We can price it.

Request a quote
WhatsApp us